Lauri Carbon Knife Blades - Finland


Finnish high quality Thyssenkrupp carbon steel blades.
Traditional Scandi grind with a small secondary bevel.  HRC 59.
In my opinion, the best bang for the buck on my web site.


Lauri 5100 Lauri 5100  69x19 mm   $11.25


Lauri 5101
Lauri 5101  70x13 mm   $9.25
OUT OF STOCK


Lauri 5102
Lauri 5102  62x17 mm  $10.50
4 in stock


Lauri 5103
Lauri 5103  77x21 mm  $11.50



Lauri 5104
Lauri 5104  85x17 mm  $12.00
4 in stock


Lauri 5105
Lauri 5105  95x19 mm  $12.50



Lauri 5107
Lauri 5107 Leuku Black  175x36 mm  $29.00  3 in stock
The tang on the larger Lauri blades can be out of line with the blade.
The manufacturer states "If needed, the tang can easily be straightened in a vice.
Clap the blade to the vice from the tang and adjust the straightness a little, then readjust the clamping to another spot (do not stress majorly a single location as it might result an even bigger counter bend and possible break off the tang) and repeat the slight adjusting. We need to do this same method a lot with the big leukus after heat treating, but it is a fairly easy procedure and the steel can withstand it really well as the hardness is around 59 HRC, it’s still hard enough to hold the edge but tough enough to withstand such treatment"



Lauri 5108
Lauri 5108 Drop-Point  80x22 mm  $17.50





Lauri 5109
Lauri 5109 Field Dressing  98x27 mm  $26.50
4 in stock


Lauri 5110
Lauri 5110 Field Dressing Small  78x21 mm  $25.00
2 in stock


Lauri 5111
Lauri 5111 Blanks  95x21 mm  $5.00
Untempered
OUT OF STOCK

Lauri 5112
Lauri 5112 Puukko  125x20 mm  $16.50
2 in stock


Lauri 5113
Lauri 5113 Skinner  90x26 mm  $18.50



Lauri 5114
Lauri 5114 Hiking  180x27 mm  $34.00
OUT OF STOCK


Lauri 5115
Lauri 5115 Laplander  145x27 mm  $26.00



Lauri 5116
Lauri 5116 105  105x20 mm  $14.50
1 in stock


Lauri 5117
Lauri 5117 Leuku  210x37 mm  $34.25
The tang on the larger Lauri blades can be out of line with the blade.
Please see the 5107
1 in stock


Lauri 5118
Lauri 5118 120  120x27 mm  $22.00



Lauri 5119
Lauri 5119 60  60x13 mm  $9.00
OUT OF STOCK

Lauri Neck 42
Lauri 5120 Neck 42  42x13 mm  $7.60
OUT OF STOCK

Lauri 5122 Lauri 5122 85 mm Convex 85x16.5 mm $16.00
OUT OF STOCK
Lauri 72 Skinner Lauri 5123 Skinner 72x26 mm  $17.00

Lauri Drop Point Lauri 5124 Drop Point 54x15 mm  $11.00
2 in stock
Lauri 5137
Lauri 5137 Leuku Polished  175x37 mm  $32.00
The tang on the larger Lauri blades can be out of line with the blade.
Please see the 5107
OUT OF STOCK




Steel analysis
Carbon steel: HRC 59 80CrV2
C-0,81 Mn-0,56 S-0,004 P-0,01 Si 0,35 V-0,161 Cr-0,54